PTH-1XA

pocket Thermo Hygrometer

Specifications
Color: Dark Gray Power
Supply: One button cell included (1 CR2032)
Humidity Range: 5 to 95%
RH Accuracy: ±5%
Temperature Range: -10 to 45°C (14 to 113°F)
Temperature Accuracy: ±1°C (±1.8°F)
Response Time: 80 seconds typical

Go to top

OS530L

Infrared Thermometer

Specifications:
Repeatability: (1% rdg + 1 digit)
Resolution: 1C or 1F (0.1C or F on OS530HR)
Response Time: 250 msec
Emissivity: 0.10 to 1.00 in 0.01 Increments
-18 to 540°C (0 to 1000 Deg F),
10:1 FOV,
Laser Dot

Go to top

 

Solomat MP Surveyor Pro

Description:
handheld data-logging instrument designed for Indoor Air Quality (IAQ) monitoring using 4-function IAQ probe or single-function probes. The Surveyor environmental monitoring system enables you to accurately and reliably measure, datalog and analyze a wide range of important parameters

Go to top

 

Kestrel 4000 Pocket Weather Tracker

Description:
Can measure EVERY major environmental condition, easily and accurately. The chart mode allows users to recall and graph up to 250 measurements, along with the date and time of storage. Measures Barometric Pressure, Altitude, Density Altitude, Temperature, Humidity, Wind Speed, Wind Chill, Dew Point, Wet Bulb, and Heat Index. Can be connected to a PC for Data Logging.

Go to top

 

Magellan GPS 315

 

Description:
With built-in coordinates for over 11,000 U.S. cities, the Magellan® GPS 315 is Used for a variety of outdoor and some indoor applications. k.

Go to top

 

CR23X Micrologger

 

Description:
Data acquisition systems are used in concert with a notebook computer interface. This combination offers relatively straightforward programming, scanning and processing of data for 16 channels. It also allows time-series measurement of geographically adjacent building parameters1.

1 Source: Vital Signs, Berkeley

Zircon Sonic Measuring Device

Description:
Measures up to 40 feet

Go to top

VELOCICALC® Plus Multi-Parameter Ventilation Meters

Description:
TSI's VELOCICALC Plus Meters simultaneously measure and data log several ventilation parameters using a single probe with multiple sensors. Model 8386 measures velocity, temperature, and calculates volumetric flowrate, pressure measurement for static pressure and Pitot tube readings, and humidity measurement as well as performs dew point, wet bulb temperature, and heat flow calculations.

Go to top

 

IAQ-CALC™ Meters

 

Description:
TSI's IAQ-Calc™ Meters are exceptional IAQ instruments for investigating and monitoring building air quality. The Model 8760 is a cost-effective carbon dioxide monitor it simultaneously measures and data logs multiple parameters to monitor indoor air quality conditions. In addition to carbon dioxide monitor that measures CO2, it also measures temperature, humidity, and calculates dew point, wet bulb temperature, absolute humidity, humidity ratio and % outside air.

Go to top

 

Simpson Sound Level Meter

Description:
Simpson's sound level meters Model 886-2 handles virtually any noise measurement requirement. It comes with a choice of fast or slow response and "A", "B" or "C" weighting. An additional calibrator is available for infield adjustment. The optional 898 octave band filter allows measurement in narrow frequency bands to isolate specific noises.

 

Minolta Illuminance Meters

 

Description:

  • Standard receptor head
  • Used for measurement of a wide range of illuminance
  • (0.01 to 299,900 lx) (0.001 to 29,990 fcd)

Go to top

 

LI-COR Pyranometers

 

Description:
A pyranometer is an instrument for measuring solar radiation received from a whole hemisphere. It is suitable for measuring global sun plus sky radiation. Solar radiation varies significantly among regions. Season and time of day are major considerations, but surrounding terrain elevation, man-made obstructions, and surrounding trees can also cause large variations in locations with a small area. Often, the required measurement is energy flux density of both direct beam and diffuse sky radiation passing through a horizontal plane of known unit area (i.e., global sun plus sky radiation)2

Go to top

2 Source: http://env.licor.com/Products/Sensors/pyra.htm

LI-COR Photometric Sensors

Description:
The LI-210SA Photometric Sensor is designed to measure illumination in terms of lux (1 footcandle=10.764 lux). This is radiation as the human eye sees it

Go to top

 

HOBO Light Intensity

 

Description:
A reusable and inexpensive general purpose light intensity logger.

Go to top

 

HOBO H8 RH/Temp Logger

 

Specifications:

  • Operating range: -4°F to +158°F
    (-20°C to +70°C), 0 to 95% relative humidity,
  • non-condensing, non-fogging (RH sensor range at right) Time accuracy: ±1 minute per week at +68°F (+20°C)
  • Capacity: 7943 measurements total
  • User-selectable sampling
  • interval: 0.5 seconds to 9 hours, recording times up to 1 year
  • Drop-proof to 5 feet Mounting kit included (hook/loop, magnet, and tape)
  • Programmable start time/date Memory modes: stop when full, wrap-around when full
  • Nonvolatile EEPROM memory retains data even if battery fails

Go to top

 

HOBO H8 Pro RH/ Temperature Logger

Similar to HOBO H8 with Higher accuracy, higher resolution, and wider range

Go to top

HOBO Temp

 

Description:
The HOBO Temp logger is a miniature, reusable data logger which continuously measures temperature in remote locations. Start the logger, readout, and plot the data with ®BoxCar or BoxCar Pro for Windows

 

HOBO Shuttle

 

Description:
The HOBO Shuttle makes it easy to offload and relaunch loggers and bring the data back to your PC. As an optional accessory, the HOBO Shuttle offers the convenience of offloading data from the logger, testing it and restarting it directly in the field, without having to retrieve the logger, bring it back to your PC, and then deploy it again in the vicinity where it was initially deployed.

Go to top

 

Presto-Tek pH- Meter

Description:
The pH-2 is the ideal pH meter for general purpose pH measurements in plant, field production line or laboratory environments. Simply dip the probe into the sample fluid and the pH valve will be digitally displayed. Unit features manually adjustable temperature compensation and replaceable pH probe.

Go to top

Taylor Pocket Sling Psychrometer

Description:
Self-contained sling pocket case and slide rule sling psychrometer. The Model 1330 permits immediate conversions of the temperatures to relative humidity from 10% to 100% with use of the slide rule which is an integral part of the case. Range 20 to 120 F. High-impact plastic. White on black scale markings. 58" x 1 58" x 6 78" for easy pocket carry. Mercury filled.

Go to top

Equipment Description

© Adil Sharag-Eldin - last update Tuesday, August 07, 2007 - Contact amsharage@saed.kent.edu


Back  

Environmental Technology Lab

[ETHome] [Site Map] [Personal] [News] [Classes] [Gallery] [Research] [Resources]